35kV Cold-Shrinking Cable Sets
35kV Cold-Shrinking Cable Sets
Product description
The product is made by injecting and vulcanizing high elastomer material in the factory, then expanding the diameter and lined with plastic bolt supports. When installed on-site, these pre-expanded pieces will have the internal support pulled out at the end or joint of the treated cable and fastened onto the cable insulation.
Product Model/Scope of Use

Product model: Cold shrinkable outdoor terminal DH-WLS

Scope of Use: It is applicable to cables rated 26/35kV, with external insulation contamination of Class E, cable XLPE or  (EPR) insulation, with nominal cross-section of conductor ranging 50~630mm2.  2

图片2.png


Product Features

●The terminal is of an integrated structure, and can be quickly installed and used for a variety of cables.

●The silicone rubber material with an improved formula has a hydrophobic terminal surface. When it is exposed to rain or moisture, water droplets on the surface are prone to slide off. The material has good resistance to aging and dirt, and remains hydrophobic even when the surface is contaminated.

●The alternating umbrella skirt design prevents rainwater from forming creepage channels from the skirt end to the skirt end, meeting the use for Class-E contaminated zone, especially suitable for use in extreme environments, for example, offshore wind farms with salt spray and humidity.


Technical Parameters

图片14.png